Trio 16 mm

Type

3-layer 1-strip solid plank

Summary     


1-strip solid plank, glued in several layers, 4-side tongue & groove, oxidative oiled or with 6-fold, abrasionfree multicomponent UV-lacquer with individually hardened layers of lacquer
Thickness in total

16mm

 

Top layer

4mm

Laying method

Free pattern

Installation
Screwed, nailed, glued, floating

 

 

Serenzo® Trio 16

Conventional engineered wood flooring

  • Entirely made of dimensionally stable oak
  • Back layer of supple softwood
  • Back layer made of high quality oak
  • Either no back layer (with plywood) or cheap rotary cut veneer, consequently reduced dimensional stability
  • Total thickness of 16 mm suitable to be fitted by either screwing/nailing onto joists, by gluing down or floating
  • Nearly impossible to lay directly onto joists and therefore requiring an expensive subfloor
  • Formaldehyde-free, cold bonding results in more dimensional stability and an emission free floor
  • Mostly heat-bond with cheap urea glue. The heat is responsible for tensions in the wood and this can eventually result in distortion
  • Traditional tongue and groove connection proven for centuries
  • New “Click”- profile making creaking noises more likely
  • 7 mm tongue increases the strength and thus the bonding between individual planks for maximum stability
  • 4-5 mm thick tongue
  • Dozens of high quality factory finishes
  • Mostly only available in lacquered and oiled sanded surface

 

 

Plank Formats
.. width width
thickness 16mm 140mm 180mm