Trio 18 mm

Type

3 ply, 1-strip wooden board

Summary    


Engineered floor 1 strip, 3 layers bonded together,  with tongue and groove on the 4 sides, factory-oiled or 5 layers of abrasion-resistant multi-component UV lacquer with individually hardened layers of lacquer, thickness 16 mm/ 18 mm, top layer thickness 4 mm/ 6 mm, in various lengths
Thickness 18mm
Top layer

6mm

Types of installation

Free pattern

 

Installation    methods

Screwed / nailed/ glued / floating

 

 

 

Serenzo® Trio 18

Conventional engineered wood flooring

  • Unequalled 6 mm thick top-layer for maximum durability
  • 2.5 to 5 mm top layer
  • Entirely made of dimensionally stable oak
  • Back layer of supple softwood
  • Back layer made of high quality oak
  • Either no back layer (with plywood) or cheap rotary cut veneer, consequently reduced dimensional stability
  • Total thickness of 18 mm suitable to be fitted by either screwing/nailing onto joists, by gluing down or floating
  • Nearly impossible to lay directly onto joists and therefore requiring an expensive subfloor
  • Formaldehyde-free, cold bonding results in more dimensional stability and an emission free floor
  • Mostly heat-bond with cheap urea glue. The heat is responsible for tensions in the wood and this can eventually result in distortion
  • Traditional tongue and groove connection proven for centuries
  • New “Click”- profile making creaking noises more likely
  • 7 mm tongue increases the strength and thus the bonding between individual planks for maximum stability
  • 4-5 mm thick tongue
  • Dozens of high quality factory finishes
  • Mostly only available in lacquered and oiled sanded surface

 

 

Plank Formats
.. width
thickness 18mm 220mm